Baseus Car Air Compressor Inflator Pump with Bright LED Light and 7500mAh battery



Need help? Make sure you check out the FAQ page!


How to use | Specifications

Monitor Tire Pressure

The Baseus Car Air Compressor Inflator Pump allows you to check your tire pressure while using it to deter over-inflation. An intelligent sensor chip is built into the air nozzle so the tire pressure is automatically detected and displayed once connect.

One-Key Start

Tire pressure can be set according to your requirements to stop inflation automatically when it reaches your desired preset preference.

M Button - Short press to turn ON the device and switch the mode. Long press for 3 seconds until the unit flashes, then short press to toggle between unit presets while flashing.

"+,-" Buttons - Adjusts preset air pressure value and preset display changes. Short press to increase or decrease.

OK Button - Press and hold for 3 seconds to turn OFF the machine when it is turned ON.

LIGHT Button - Short press once to turn ON the light, then short press once for strobe light, then short press once to SOS flashing light.



*Note: Due to the limitation of cylinder number, it is recommended to pause for 5 minutes after using for 10 minutes. Otherwise, the rising temperature of the metal shell will damage the motor.

Durable Battery

The device comes equipped with a 7500mAh battery, capable of use without needing to be connected to another charger.

Bright LED Light

The Baseus Car Air Compressor Inflator Pump features a bright LED light, making it easy to use no matter the time or place. It is convenient to charge at night and can send out an S0S in case of an accident.

Heavy Duty Construction

The device is constructed using heavy-duty metal ensuring durability and longevity. The natural rubber inflation tube is highly soft, so it can't break easily.

Double-Sided Heat Dissipation

The air pump is equipped with 274 small air outlets on both sides, ensuring the stable operation of the motor.


How to Use

  1. Install the corresponding air nozzle according to the inflation equipment
  2. Press the M key to adjust the device to be charged
  3. Connect the air nozzle, press the OK button lightly to start inflation
  4. Stop when top up and pull out the air nozzle to stop inflation

Multiple Uses

The device is perfect for cars, bicycles, sporting equipment, and more!